SPE Plates
Waters Corp Oasis HLB 96-well Plate, 5 mg Sorbent per Well, 30 µm, 1/pk
The Oasis HLB 96-well plate contains the Oasis HLB sorbent, which is a universal polymeric reversed-phase sorbent that was developed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. The unique balance of hydrophobicity and water-wettability of the Oasis HLB sorbent means you will never have to worry about poor results if individual wells of the 96-well plate dry out during the critical steps prior to sample loading. The Oasis HLB 96-well plate is designed to be used on many manifold configurations and most robotic liquid handling systems.
Waters Corp Waters Oasis MAX 96-well Plate, 60 mg Sorbent per Well, 60 μm
The Oasis MAX 96-well plate utilizes a mixed-mode polymeric sorbent designed for the extraction of acidic compounds with anion-exchange groups, offering enhanced selectivity and sensitivity. Its balanced hydrophobic and water-wettable properties prevent issues if wells dry out before sample loading. A 60 μm particle size is recommended for viscous samples, and the plate is compatible with various manifold configurations and robotic liquid handling systems.
- Optimized for selectivity and sensitivity in extracting acidic compounds with anion-exchange groups.
- Balanced hydrophobicity and water-wettability prevents issues if wells dry out before sample loading.
- Compatible with multiple manifold configurations and most robotic liquid handling systems.
- Supports high resolution, sensitivity, and throughput.
- Reduces time and cost per sample while maintaining high-quality results.
Waters Corp Oasis 96-well Plate, MCX, 30 mg Sorbent per Well, 60 μm
The Oasis MCX 96-well plate contains a novel, mixed-mode polymeric sorbent optimized for higher selectivity and sensitivity in extracting basic compounds with cation-exchange groups. Its unique balance of hydrophobicity and water-wettability ensures good results even if individual wells dry out during critical steps before sample loading.
- Optimized for selective extraction of basic compounds with cation-exchange groups.
- Features a 60 μm particle size, recommended for viscous samples.
- Compatible with many manifold configurations and robotic liquid handling systems.
- Constructed from polypropylene for chemical stability and inertness.
- Offers a broad operational pH range of 0 to 14.
- Provides 30 mg sorbent weight per well across 96 wells.
- Ion exchange capacity of 1 meq/gram and a pore size of 80 Å.
- Water wettable and mass spec compatible.
Waters Corp Waters Oasis WAX 96-well Plate, 10 mg Sorbent, 30 μm, Water Wettable
This 96-well plate features a polymeric reversed-phase, weak anion exchange mixed-mode sorbent for fast, simple, and highly selective sample preparation of strong acidic compounds. Its unique balance of hydrophobicity and water-wettability ensures consistent results even if wells dry out during critical steps. Compatible with various manifold configurations and most robotic liquid handling systems, it provides consistent results without evaporation or reconstitution, saving time.
- Polymeric reversed-phase, weak anion exchange mixed-mode sorbent
- Designed for selective sample preparation of strong acidic compounds
- Sorbent weight: 10 mg
- Particle size: 30 μm
- Ion exchange capacity: 0.6 meq/gram
- Mass spectrometry compatible
- Sorbent substrate: Copolymer
- Water wettable for consistent results
- pH range: 0 to 14
- Material: Polypropylene
Med Vet International 2.4mm Compression Plate, 12 hole -- 87mm Diameter, J1074I
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Phenomenex Inc 60 mg / well, 96-Well Plates
Strata™-X-Drug B 33 m Polymeric Strong Cation 8E-S128-UGB
Analytical Sales & Services Ion Exchange WCX Phase, 2mL 96 Well Filter Plate, 30 mg
Polymer Based Weak Cation Exchange SPE, 2mL 96 Well Filter Plate, 30 mg per well
